5 HP air cooled heat pump chiller
An industrial heat pump unit works by extracting heat from the surrounding air and using it to heat water or air for industrial or commercial use. Consist of a compressor, heat exchanger, and condenser.
This type of heat pump unit is commonly used in industrial and commercial applications, such as food processing plants, breweries, and swimming pools. It can be used to heat water for washing or cleaning, hospitals, hotels, manufacturing industry, etc.
Description
Heat pump units offer a cost-effective, energy-efficient, and easy-to-install option for heating and cooling in a wide range of applications. One of the main advantages of an air-cooled industrial heat pump unit is that it can provide efficient heating and cooling without the need for external water sources. This makes it a good option for locations where water is scarce or expensive.
| Model | KCPH-005 | ||
| Cooling capacity | kW | 15.2 | |
| kcal/h | 13070 | ||
| Heating capacity | kW | 18.1 | |
| kcal | 15530 | ||
| Power consumption | kW | 4.27 | |
| Chilled fluid flow | m3/h | 2.3 | |
| Power supply voltage | 3PH-(200V,220V, 415V,380V)-50HZ/60Hz | ||
| Compressor | Type | Hermetic scroll/piston | |
| Start-up mode | Direct start | ||
| Power | kW | 3.8 | |
| Refrigerant | Type | R22, (R407c/R134a) | |
| Control mode | Temperature-sensitive expansion valve | ||
| Filling amount | kg | 3.6 | |
| Water heat exchanger | Type | Shell and Tube | |
| Pipe | B | PT 1-1/2″ | |
| Air heat exchanger | Type | Internal thread copper tube fin | |
| Surface area/row | M2 | 0.62/4R | |
| Axial fan | Type | Low noise axial flow | |
| Air Volume | CMM | 110 | |
| Power | kW | 0.37 | |
| Protective devices | High and low voltage switches, antifreeze protection, soluble plug, safety valve, overload protection device, coil overheat protectors, temperature automatic protection switches, etc. | ||
| Dimension | L | mm | 920 |
| W | mm | 850 | |
| H | mm | 1300 | |
| Weight | kg | 190 | |
Note:
- The measurement condition of the specifications and parameters: cooling water outlet/inlet temperature 12℃/7℃, outdoor ambient temperature DB35℃/WB24℃; hot water outlet/inlet temperature 40℃/45℃ outdoor ambient temperature DB7℃/WB6℃.
- The above specifications are subject to change without prior notice. If there are special requirements, please for specifications before ordering.
Chiller installation diagram (Only for reference)
Please ask your correspondent from KAYDELI for the specific installation diagram mentioning the model number (If needed).
