Swimming pool and spa chiller
Dual-temperature chillers are often used in residential or commercial settings where both a swimming pool and spa are present, as they allow users to maintain different water temperatures for each.
1. Working range: circulating water temperature range: 5 ° C to 50° C, the temperature difference between the inlet and outlet water is 3 ° C to 8 ° C. Use in environments where the condensing temperature is not higher than 35 ° C
2. If there are special requirements, please request specifications before ordering.
Description
A swimming pool and spa dual-temperature chiller is a type of chiller designed to cool water for both a swimming pool and a spa. These chillers are typically designed to operate at different temperature ranges, with the swimming pool water temperature being cooler than the spa water temperature. Dual-temperature chillers come in a variety of sizes and configurations to accommodate different pool and spa sizes and can be powered by electricity or natural gas. They may also include additional features such as remote control operation, programmable settings, and automatic shut-off to conserve energy.
| Model | KCH-008 | ||
| cooling capacity | kW | 20.4 | |
| 50HZ | |||
| kcal/h | 17566 | ||
| 50Hz | |||
| Input power | kW | 20.5 | |
| Chilled fluid flow | m3/h | 7.5 | |
| Power supply voltage | 3PH-200V/220V/415V-50HZ/60Hz | ||
| Compressor | Type | Hermetic scroll type (Piston) | |
| Start-up mode | Sequential start | ||
| Power(kW) | 7 | ||
| Refrigerant | Type | R-22 (R134a, R407C) | |
| Control mode | Capillary | ||
| Evaporator | Type | Shell and Tube(Water tank with coil) | |
| Pipe | B | PT 1″ | |
| Cooling water volume (m3) | 1.40 | ||
| Condenser | High-efficient finned copper tube | ||
| Cooling fan | Type | Low noise axial flow(Low noise outer rotor fan) | |
| Air volume(M3/h) | 8000 | ||
| Power(kW) | 0.55 | ||
| Tank volume | L | 120 | |
| Water pump power | kW | 0.75 | |
| Heating device | Heating tube | ||
| Power(KW) | 12 | ||
| Protective device | Compressor overheating, over current, high and low pressure, over temperature, flow switch, phase sequence, phase-missing, exhaust overheating, anti-freezing. | ||
| Dimension | L | mm | 1200 |
| W | mm | 740 | |
| H | mm | 1370 | |
| Weight | kg | 310 | |
Installation Diagram
Note: This Diagram is only for reference, please contact the Kaydeli team to get the actual diagram for the specific model.
