4 ton hot and cold dual chiller
- The measurement conditions of the above specifications and parameters: chilled water inlet temperature 12 ° C, outlet temperature 7 ° C, outdoor ambient temperature DB 35 ° C / WB 24 ° C;
2. Working range: circulating water temperature range: 5 ° C to 50° C, the temperature difference between the inlet and outlet water is 3 ° C to 8 ° C. Use in environments where the condensing temperature is not higher than 35 ° C
3. If there are special requirements, please request specifications before ordering.
Description
The compressor (input electric power) is sucked into the low-temperature and low-pressure gas-energy refrigerant in the evaporator, compressed into high-temperature and high-pressure gas-energy refrigerant and sent to the condenser, the high-temperature and high-pressure gas-energy refrigerant in the condenser radiates heat to the outside (air or water), It becomes a high-temperature and high-pressure liquid refrigerant, which becomes a low-temperature and low-pressure liquid refrigerant after passing through a throttle valve (expansion valve, capillary tube), and the low-temperature liquid refrigerant enters the evaporator to absorb heat (toward outside refrigeration), and the low-temperature and low-pressure gas refrigerant are compressed by the compressor. Constitutes an inhalation, continuous circulation refrigeration cycle.
Model | KCH-005 | ||
cooling capacity | kW | 13.32 | |
50HZ | |||
kcal/h | 11601 | ||
50Hz | |||
Input power | kW | 14.7 | |
Chilled fluid flow | m3/h | 2.32 | |
Power supply voltage | 3PH-220V-50HZ | ||
Compressor | Type | Hermetic scroll type (Piston) | |
Start-up mode | Sequential start | ||
Power(kW) | 4.6 | ||
Refrigerant | Type | R-22 (R134a, R407C) | |
Control mode | Expansion valve | ||
Evaporator | Type | Shell and Tube(Water tank with coil) | |
Pipe | B | PT 1″ | |
Condenser | High-efficient finned copper tube | ||
Cooling fan | Type | Low noise axial flow(Low noise outer rotor fan) | |
Air volume(M3/h) | 5000 | ||
Power(kW) | 0.37 | ||
Tank volume | L | 70 | |
Water pump power | kW | 0.75 | |
Heating device | Heating tube | ||
Power(KW) | 9 | ||
Protective device | Compressor overheating, over current, high and low pressure, over temperature, flow switch, phase sequence,phase-missing, exhaust overheating,anti-freezing. | ||
Dimension | L | mm | 1140 |
W | mm | 560 | |
H | mm | 1040 | |
Weight | kg | 170 |