30 kw or 10 tons laser chiller
Easy to install and operate, the key components of the refrigeration system and electric system are all made of international brand products to excellent quality and reliability of the equipment. Anticorrosion and rust proof. The temperature control accuracy is ±1°C. The temperature display range is 5°C~50°C (customizable). Widely used in laser cutting machines, MRI machines, research laboratories, etc.
Description
| Model | KDL-012 | ||
| Cooling capacity | kW | 29.8 | |
| kcal/h | 25633 | ||
| Power consumption | kW | 11.69 | |
| Power supply voltage | 3PH-(200V,220V, 415V,380V)-50HZ/60Hz | ||
| Refrigerant | Type | R22, (R407c/R134a) | |
| Control mode | Expansion valve | ||
| Compressor | Type | Hermtic rotating type | |
| Condenser | Type | High efficient finned copper tube + low noise outer rotor fan | |
| Cooling air volume | m3/h | 12000 | |
| Evaporator | Type | Water tank with coil (Plate type) | |
| Cooling fluid volume | m3/h | 5.20 | |
| Water tank volume | L | 200 | |
| In/Out water pipe | 1-1/2″ | ||
| Sewage outlet | 1″ | ||
| Pump | Power | kW | 1.1 |
| Flow swift | L/min | Closed flow >16 Disconnected flow <10 | |
| Protective devices | Compressor overheating, over current, high and low pressure, over temperature, flow switch, phase sequence, phase-missing, exhaust overheating, anti-freezing protection. | ||
| Dimension | L | mm | 1500 |
| W | mm | 780 | |
| H | mm | 1600 | |
| Weight | kg | 550 | |
Note:
- The cooling capacity is based on: Chilled water inlet/outlet temperature 12℃/ 7℃, cooling inlet/outlet air temperature 30℃/35℃.
- Working range: chilled water temperature range is 5℃ to 35℃, chilled water inlet/outlet temperature difference is 3℃ to 8 ℃.
The above specifications are subject to change without prior notice.
Installation diagram
Note: This diagram is only for reference, to get the actual diagram for the specific model please contact the Kaydeli team after placing your order.
